Even gegoogled en in de handleiding dit gevonden.
Memory channel scan mode.
The memory channels may be automaticallY scanned in order to quicklY check
for activity of known ore-programmed specific frequencies.
OnlY one of the four
memory banks can be scanned at a time (maximum of lOO memory channels).Memory channels which do not contain data will be skiPPed as will those which
have been 'locked out'.
Example:
Scan all active memory channels in memory bank 2.
- Press [2nd FJ [BANK] in sequence. Press the [UP/DOWN] key until
<BANK2) is displayed on the LCD then press [ENTER]. This is to select
memory bank number - Press [MEMO] This selects memory recall.
- Press and hold the [UP/DOWN] key for more than one second to start
memory scan. the (M) indicator will flash on the LCD to remind you that
you have entered memory scan mode. - Should the receiver stop scanning (or refuse to scan). press and hold
the [UP/DOWNJ keY for more than one second to force the receiver to
resume scan even if a signal is still present. - Press [MEMOJ to cancel memory scan.
- Operating the receiver.
Ik hoop dat het je lukt, succes!
